HGDO 10″ Dashboard Video Recorder

Specification

Model: H350
Display: 10.88 inch
Memory card: Class 10 TF card(8-128GB)
Video resolution: 1920x1080P & 1920x1080P
Time-Lapse : Off/ 1S/ 2S/ 3S
Parking Guard: Off/ Low/ Middle/ High
Screen Saver: Support to set the time when the screen turns off automatically
Frequency: 50HZ/ 60HZ
Key sound: ON/ OFF
Boot sound: ON/ OFF
Speaker Sound: Mute/ Low/ Middle/ High
G-sensor: Off/ Low/ Middle/ High
3 options of sensitivity Lens: 8M pixels,170 degree HD wide angle Seamless video: No interrupt video
Loop video: Optional 1/2/3/5 min, new file auto overwrites old file when card is full.
Aperture: F2.0
Button Sound: Turn on/off
Date/ Time: Support
2 split view display simultaneously: Support
Battery: Build-in lithium polymer battery
Car USB power: 5V
Working temperature:-20℃ to 70℃
Storage temperature:-30℃ to 80℃
Installation type: Rearview mirror Camera

H352= H350+dashboard console

Slide the Screen Up and Down to Adjust the Viewing Angle

Swipe right to switch front and rear cameras

Rear View Camera

Smart rear view angle switch between driving and parking. You could see all further vehicles and objects clearly behind you while real-time driving and it will lower the rear view angle automatically to give a closer backup image when parking.

24H Parking Monitor

When someone near your car or vehicle starts to move, Automatically turn on and start recording when detects any impact or collision,the device automatically automatically recording for few seconds,make sure 24hr Parking Guard. Attention: It should be connected by a hardwire， please buy our 24h parking monitor cable

24H Parking Monitor Cable Connection

Use the buck line to not occupy the cigarette lighter interface.
First, connect the negative pole(black line) of the buck line to the ground of the car fuse box;
Secondly, if you want to continue monitoring after parking (the DVR works 24 hours), connect the yellow cable to the BAT interface of the car fuse box;
If you want to stop monitoring after parking (the DVR does not work after parking), connect the red line to the fuse box ACC interface.

Loop Recording + G-sensor

G-sensor – Powered automatic video recording and video file locking when a collision or crash is detected. The sensitivity of the G-sensor can be set to different levels. Loop Recording Function- Ensures continuous recording without missing a second,record automatically during vehicle ignition, switch off automatically with ignition off to get you free from the hands operation.

Brand Story